End Spray

Flows: 8.1 to 48.9 gpm (1840 to 11106 L/hr)

Pressures: 10 to 25 psi (0.69 to 1.72 bar)

Product Tabs

Videos

Overview

Senninger's low pressure End Spray is designed for use at the end of a machine. It can help irrigate the area between the last sprinkler and the end gun. The low angle design resists the effects of wind and the large orifice resists clogging.

Features

No moving parts for longer product life
Provides a 180º distribution with good uniformity over large area to help reduce compaction and run-off
End Spray must be installed on a 1" F NPT connection
One-year warranty on materials and workmanship

Models

Copy Link

END SPRAY - SPECIFICATION BUILDER

Model	Description
ESPA4Mxx	End Spray complete, including nozzle w/ O-ring
ESPNZxx	Nozzle with O-ring (#20, 26, 32, 38)
ESPT4M	End Spray Tube 1" M NPT

Specs

Copy Link

End Spray

END SPRAY DESIGN CRITERIA
Nozzle Sizes
Minimum	#20 5/16"
Maximum	#38 19/32"
Flows
Minimum	8.1 gpm
Maximum	48.9 gpm
Average Radius
At 7 - 12 ft	25 - 29 ft
Pressure at the Nozzle
Minimum	10 psi
Maximum	25 psi

End Spray (Metric)

END SPRAY DESIGN CRITERIA
Nozzle Sizes
Minimum	#20 7.94 mm
Maximum	#38 15.08 mm
Flows
Minimum	1840 L/hr
Maximum	11106 L/hr
Average Radius
At 2.13 - 3.66 m	7.6 - 8.8 m
Pressure at the Nozzle
Minimum	0.69 bar
Maximum	1.72 bar