i-WOB2 System DESIGN CRITERIA |
Standard Angle (Grey) 6-Groove Small Droplets |
Standard Angle (Black) 9-Groove Medium Droplets |
Low Angle (Blue) 9-Groove Medium Droplets |
Low Angle (White) 6-Groove Large Droplets |
Nozzle Sizes* | ||||
at 0.41 bar * | #12 - 26 4.76 - 10.32 mm |
#12 - 26 4.76 - 10.32 mm |
#12 - 26 4.76 - 10.32 mm |
#12 - 26 4.76 - 10.32 mm |
at 0.69 - 1.03 bar | #10 - 26 3.97 - 10.32 mm |
#6 - 26 2.38 - 10.32 mm |
#6 - 26 2.38 - 10.32 mm |
#12 - 26 4.76 - 10.32 mm |
Flows | ||||
at 0.41 bar ** | 570 - 2635 L/hr | 570 - 2635 L/hr | 570 - 2635 L/hr | 570 - 2635 L/hr |
at 0.69 - 1.03 bar | 509 - 4168 L/hr | 182 - 4168 L/hr | 182 - 4168 L/hr | 736 - 4168 L/hr |
Diameters | ||||
0.91 m height at 0.41 bar ** | 8.0 - 9.1 m | 9.1 - 10.4 m | 8.5 - 9.1 m | 8.5 - 9.8 m |
0.91 m height at 0.69 - 1.03 bar | 11.0 - 14.0 m | 9.5 - 16.2 m | 9.5 - 14.3 m | 12.2 - 14.9 m |
1.83 m height at 0.41 bar ** | 9.1 - 10.4 m | 11.0 - 12.8 m | 9.8 - 10.7 m | 9.8 - 11.9 m |
1.83 m height at 0.69 - 1.03 bar | 10.7 - 15.2 m | 10.4 - 17.4 m | 10.7 - 15.2 m | 13.4 - 16.2 m |
2.74 m height at 0.41 bar ** | 10.4 - 11.0 m | 12.2 - 14.0 m | 11.0 - 12.8 m | 10.4 - 13.4 m |
2.74 m height at 0.69 - 1.03 bar | 11.0 - 15.8 m | 11.6 - 18.0 m | 11.9 - 16.8 m | 14.0 - 17.4 m |
Maximum Spacing*** | ||||
at 0.41 bar ** | 3 m | 3 m | 3 m | 3 m |
at 0.69 - 1.03 bar | 5.5 m | 6.1 m | 5.5 m | 4.6 m |
Pressure at the Nozzle | ||||
Minimum** | 0.41 bar | 0.41 bar | 0.41 bar | 0.41 bar |
Maximum | 1.03 bar | 1.03 bar | 1.03 bar | 1.03 bar |
*It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates.
** Senninger recommends 0.69 bar for optimum performance; 0.41 bar can be used for nozzles #12 and larger.
*** For optimum performance, Senninger recommends the use of maximum spacing for 1-2 spans only.
Note: Always mount the i-Wob2 on a minimum of 0.6 m reinforced flexible hose. The hose must be on the outlet end of any semi-rigid or rigid drop.
Keep i-Wobs above crop canopy when outlet spacing exceeds 3.0 m. This is especially important on high profile crops.