| Filter Regulator DESIGN CRITERIA |
Preset Outlet Pressure | Maximum Inlet Pressure |
Mesh Filter Screen | Mesh Orifice (microns) |
UP3 Nozzle Number |
| FPSR2063M3F20 | 6 psi | 80 psi | 20 mesh (black rings) | 841 | #13 - #26 |
| FPSR2063M3F30 | 30 mesh (green rings) | 595 | #6 - #12.5 | ||
| FPSR2063M3F40 | 40 mesh (grey rings) | 400 | #2 - #5.5 | ||
| FPSR2103M3F20 | 10 psi | 90 psi | 20 mesh (black rings) | 841 | #13 - #26 |
| FPSR2103M3F30 | 30 mesh (green rings) | 595 | #6 - #12.5 | ||
| FPSR2103M3F40 | 40 mesh (grey rings) | 400 | #2 - #5.5 | ||
| FPSR2153M3F20 | 15 psi | 95 psi | 20 mesh (black rings) | 841 | #13 - #26 |
| FPSR2153M3F30 | 30 mesh (green rings) | 595 | #6 - #12.5 | ||
| FPSR2153M3F40 | 40 mesh (grey rings) | 400 | #2 - #5.5 | ||
| FPSR2203M3F20 | 20 psi | 100 psi | 20 mesh (black rings) | 841 | #13 - #26 |
| FPSR2203M3F30 | 30 mesh (green rings) | 595 | #6 - #12.5 | ||
| FPSR2203M3F40 | 40 mesh (grey rings) | 400 | #2 - #5.5 | ||
| FPSR2103M3F120 | 10 psi | 90 psi | 120 mesh screen (red rings) | 125 | 0.5 - 15 gpm |
| FPSR2103M3F140 | 140 mesh screen (blue rings) | 105 | |||
| FPSR2153M3F120 | 15 psi | 95 psi | 120 mesh screen (red rings) | 125 | 0.5 - 15 gpm |
| FPSR2153M3F140 | 140 mesh screen (blue rings) | 105 | |||
| FPSR2203M3F120 | 20 psi | 100 psi | 120 mesh screen (red rings) | 125 | 0.5 - 15 gpm |
| FPSR2203M3F140 | 140 mesh screen (blue rings) | 105 | |||
Shaded models designed for use with drip systems.
The pressure regulator shall maintain the predetermined operating pressure provided that the inlet pressure is at least 5 psi (0.34 bar) above the expected outlet pressure, with flows up to 11 gpm (2498 L/hr), but not exceeding the maximum inlet pressure of 80 psi above the model’s pressure rating. Higher flows require additional inlet pressure to engage the regulator. Where flows are greater than 11 gpm (2498 L/hr), the inlet pressure should be at least 9 psi (0.62 bar) above the expected outlet pressure but not exceeding the maximum inlet pressure of 80 psi above the model’s pressure rating.
Pressure regulators should always be installed downstream of all shut-off valves.
Recommended for outdoor use only. Not NSF certified.
